December 22,2020

3V0-42.20 Advanced Design VMware NSX-T Data Center 3.0 exam is a new VMware exam associated with VCAP-NV Design 2020 Certification. If you are going to prepare for this VMware 3V0-42.20 exam, we highly recommend Passcert VCAP-NV Design 2020 3V0-42.20 Dumps for your best preparation. It covers all the 3V0-42.20 exam objectives and real questions to help you get familiar with the real test and you will feel confident to pass your 3V0-42.20 exam successfully in your first attempt after studying Passcert VCAP-NV Design 2020 3V0-42.20 Dumps. You also can find other hot VMware Certifications in our website.

 

3V0-42.20 Advanced Design VMware NSX-T Data Center 3.0

The Advanced Design VMware NSX-T Data Center 3.0 exam (3V0-42.20) which leads to VMware Certified Advanced Professional – Network Virtualization Design 2020 certification is a 57-item exam, with a passing score of 300 using a scaled method. Candidates are given an appointment time of 130 minutes, which includes adequate time to complete the exam for non-native English speakers.

 

Advanced Design NSX-T Data Center 3.0 exam tests an individual's ability to gather customer requirements, risks, constraints, and assumptions, and use that information to make design recommendations for NSX-T Data Center 3.0 solutions.

 

3V0-42.20 Exam Details

Sections Included in the Exam

Section 1 – Architectures and Technologies - There are no testable objectives for this section
Section 2 – VMware Products and Solutions- There are no testable objectives for this section

Section 3- Planning and Designing

Objective 3.1 - Create a Conceptual Design for NSX-T Data Center
Objective 3.1.1 - Gather Customer Requirements
Objective 3.1.2 - Analyze and Differentiate Requirements, Risks, Constraints, Assumptions and Use Cases Based on Current Customer Environment.
Objective 3.2 - Create a Logical Design for NSX-T Data Center
Objective 3.2.1 - Map Business Requirements to the Logical Design
Objective 3.2.2 - Map NSX-T Data Center Solution Dependencies
Objective 3.2.3 - Analyze Availability Requirements
Objective 3.2.4 - Analyze Manageability Requirements
Objective 3.2.5 - Analyze Performance Requirements
Objective 3.2.6 - Analyze Recoverability Requirements
Objective 3.2.7 - Analyze Security Requirements
Objective 3.2.8 - Analyze Scalability Requirements
Objective 3.3 - Create a Physical Design for NSX-T Data Center
Objective 3.3.1 - Create a Physical Design for NSX-T Data Center Compute
Objective 3.3.2 - Create a Physical Design for NSX-T Data Center Storage
Objective 3.3.3 - Create a Physical Design for NSX-T Data Center Networking

Section 4 – Installing, Configuring, and Setup- There are no testable objectives for this section

Section 5 – Performance-tuning, Optimization, Upgrades - There are no testable objectives for this section
Section 6 – Troubleshooting and Repairing - There are no testable objectives for this section
Section 7 – Administrative and Operational Tasks - There are no testable objectives for this section

 

Share Part of VCAP-NV Design 2020 3V0-42.20 Free Questions

Which is a family of solutions for data center designs that span compute, storage, networking, and management, serving as a blueprint for a customer’s Software Defined Data Center (SDDC) implementations? (Choose the best answer.)
A. VMware SDDC Design
B. VMware Validated Design
C. VMware POC Design
D. VMware Cloud Foundation
Answer: B

 

Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)
A. IPv6 OSPF
B. IPv6 static routing
C. IPv6 switch security
D. IPv6 DNS
E. IPv6 Distributed Firewall
F. IPv6 VXLAN
Answer: BCE

 

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Some workloads should be moved to a Cloud Provider.
Extend network’s VLAN or VNI across sites on the same broadcast domain.
Enable VM mobility use cases such as migration and disaster recovery without IP address changes.
Support 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)
A. Load Balancer
B. Reflexive NAT
C. SSL VPN
D. L2 VPN
Answer: D

 

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
There are six hosts and hardware has already been purchased.
Customer is planning a collapsed Management/Edge/Compute cluster.
Each host has two 10Gb NICs connected to a pair of switches.
There should be no single point of failure in any proposed design.
Which virtual switch design should the architect recommend to the organization? (Choose the best answer.)
A. Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.
B. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.
C. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs.
D. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC.
Answer: A

 

What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)
A. reduced administrative overhead
B. predictable network performance
C. multiple Tier-0 gateways per Edge Node Cluster
D. support for Edge Node Clusters with more than 10 Edge Nodes
Answer: B