Preparing for the NetApp Certified Implementation Engineer–SAN, Specialist ONTAP exam can be a challenging endeavor, requiring a deep understanding of SAN and ONTAP technologies. To help you navigate this rigorous certification process, Passcert offers comprehensive NetApp Implementation Engineer–SAN, ONTAP NS0-521 Dumps with the essential knowledge and hands-on practice needed to master the exam content. These NetApp Implementation Engineer–SAN, ONTAP NS0-521 Dumps also include a variety of practice questions that help you familiarize yourself with the types of questions you will encounter on the actual exam. This practical approach not only boosts your confidence but also improves your problem-solving skills, enabling you to tackle even the most challenging questions with ease.

The NetApp Certified Implementation Engineer–SAN, ONTAP exam tests the candidate's ability in implementing, integrating, and troubleshooting ONTAP SAN, FC switched fabric, NVMe, and iSCSI solutions, different operating systems (Windows, LINUX, ESX, UNIX) and applications. Candidates should have 6-12 months experience implementing ONTAP SAN solutions, and advanced SAN knowledge of integrating and configuring block protocols in a customer environment. Candidates must first achieve the NetApp Certified Data Administrator (NCDA) certification.

Prerequisites and inventory for the installation of all SAN components during planning.

Configuration components using tools.

Solution design and hardware provisioned to meet customer's requirements or expectations.

Environmental or physical considerations.

Data protection concepts

Storage controller configuration concepts

Switch and/or host configuration concepts

Storage space utilization or management concepts

Clustered storage systems and node configuration tasks

SVM configuration tasks

Clustered storage system FCP configuration tasks

Clustered storage system NVMe configuration tasks

Clustered storage system iSCSI configuration tasks

Switches and host systems

Data protection

Storage space utilization or management concepts

Testing tasks

Troubleshooting tasks

Data migration

1. Understand the Exam Objectives: Begin by thoroughly reviewing the official exam guide provided by NetApp. This guide is crucial as it outlines all the topics that will be covered in the exam and details the weightage of each section. Understanding these objectives will help you prioritize your study plan and focus more on the areas that carry the most weight in the exam.

2. Study the Official Documentation: Dive deep into NetApp's official documentation, which includes comprehensive technical reports and user guides. These resources are invaluable for gaining an in-depth understanding of SAN (Storage Area Network) and ONTAP (NetApp's data management software). Make sure to read through various documents, taking notes on important points and best practices.

3. Hands-On Practice: If possible, set up a lab environment that mimics real-world scenarios. This hands-on practice is essential for gaining practical experience with SAN and ONTAP technologies. By working directly with the systems, you can better understand the concepts and apply the theoretical knowledge you've gained from the documentation.

4. Join Study Groups: Engaging with online forums and study groups can be highly beneficial. These platforms allow you to discuss complex topics, share resources, and gain insights from other candidates who are also preparing for the exam. Participating in study groups can provide different perspectives and help reinforce your understanding of the material.

5. Take Practice Tests: Regularly taking practice exams is a critical part of your preparation. These tests help you assess your knowledge and identify areas where you need further study. By simulating the exam environment, practice tests can also help reduce anxiety and improve your time management skills during the actual exam. Make sure to review your results and focus on improving your weak areas.

1. Which two NetApp features provide synchronous data replication between two sites for SAN workloads with automatic failover in case of a site disaster? (Choose two.)

A.SnapMirror active sync

B.SnapMirror SVM

C.SnapMirror Synchronous

D.MetroCluster IP

Answer: C, D

2. A customer asks for help cloning one database LUN from a SnapMlrror destination volume for testing the data with a new application.

What command should the administrator use to clone the LUN?

A.volume fileclonecreate

B.lun wovestart

C.volumeclone create

D.volumemove start

Answer: C

3. A customer opens a support case for performance issues with an FC Oracle database after migrating from a NetApp AFF system to a NetApp All SAN Array (ASA) platform. Further investigation shows that the number of paths exceeds the recommendation for SAN deployment.

What are two ways to address this problem? (Choose two.)

A.Use Selective LUN Mapping.

B.Reconfigure the fabric switch zoning.

C.Have the database team change their backup and recovery schedules for the database.

D.Reconfigure the ALUA settings.

Answer: A, B

4. What needs to be done to create a consistent Snapshot copy of a LUN without disruptions?

A.Ensure that the LUN is the only one in the volume.

B.Quiesce I/O to the LUN.

C.Ensure that the LUN Is unmapped from the host.

D.Map the LUN to a host.

Answer: B

5. A healthcare customer wants to Implement an FC SAN solution consisting of a NetApp ONTAP system, Broadcom switches, and servers.

Which tool contains detailed blueprints and implementation references that can be used to design this solution?

A.NetApp Fusion

B.NetApp Verified Architecture

C.NetApp Active IQ Config Advisor

D.NetApp Active IQ Unified Manager

Answer: B

6. An administrator creates a new volume and a LUN for an SAN-connected application that uses snapshots. The application has fast-growing data that is constantly being populated and deleted afterwards.

Which option can be set to manage the space automatically?

A.Enable automatic resizing on the volume.

B.Enable space reservation on the LUN.

C.Disable volume snapshot autodelete.

D.Unmap the LUN.

Answer: A

7. What connectivity Is required between NetApp ONTAP clusters in order to configure SnapMirror active sync across two data centers for FC?

A.Cedicated FC switches and ISL

B.Shared FC switches

C.Cluster peering

D.Dedicated IP switches and ISL

Answer: C

8. A four-node NetApp ONTAP SAN cluster has been deployed. After installation, the engineer wants to verify cabling.

Which NetApp tool should the engineer use?

A.NetApp Host Utilities package

B.Active IQ Config Advisor

C.Interoperability Matrix Tool

D.Hardware Universe

Answer: B

9. An administrator has a NetApp AFF cluster with two SVMs serving LUNs. SnapMirror active sync is configured, and a disaster recovery test is planned over the weekend.

Which NetApp ONTAP command will show the status of this test?

A.snapmirror failover show

B.network interface failover-groups show

C.storage failover hwassist show

D.snapnirror config-replication status show

Answer: A

10. During maintenance of A NetApp AFF ONTAP cluster, which two steps are needed to move the SAN UFs to new nodes that are members of a portset? (Choose two.)

A.Remove the LIF from the portset.

B.Disable the SLM feature for the node that hosts the LIF.

C.Disable the zoning of the LIF WWPN.

D.Take the SAN LIF offline.

Answer: A, D