If you're looking to become an expert in networking, or to further your career in this field, passing the DEA-5TT2 Associate – Networking Exam is a crucial step. And Passcert is here to help you ace your test with their latest DEA-5TT2 Associate – Networking Exam Dumps. These DEA-5TT2 Associate – Networking Exam Dumps are designed to closely mimic the format of the actual exam, so you'll be well-prepared for what you'll face on test day. With Passcert DEA-5TT2 Associate – Networking Exam Dumps, you'll be able to prepare thoroughly for your DEA-5TT2 exam.  You'll be able to answer questions quickly and accurately, and you'll be well on your way to passing your DELL EMC DEA-5TT2 exam with flying colors.

DEA-5TT2 Associate – Networking Exam is a qualifying exam for the Associate - Networking track. This exam focuses on basic Networking foundational skills and portfolio introduction. There are 60 questions totally in the DEA-5TT2 exam, you need to answer all questions in 90 minutes, and the passing score is 60%.

Explain the purpose and function of network devices such as switches and routers

Distinguish between interface and cabling options (Copper, Fibre, Breakout)

Configure and verify the initial configuration steps for a switch

Describe how Ethernet addressing and framing operates (Source learning,Mac address tables)

Describe the operation and behavior of LLDP, VLANs, STP, LAG (Link Layer Discovery Protocol, Virtual LANs, Spanning-Tree Protocol, Link Aggregation Group)

Identify the CLI commands to configure and verify LLDP, VLANs, STP, LAG (Link Layer Discovery Protocol, Virtual LANs, Spanning-Tree Protocol, Link

Aggregation Group)

Configure and verify common storage networking features (flow control, MTU, Portfast)

Identify the differences between private and public IP addressing

Configure and verify the operation of IPv4 addressing (IP address ranges, subnetting, analyze routing table entries)

Describe the IPv6 address format and types of IPv6 address

Explain the forwarding logic used by Layer 3 capable devices

Identify the differences between static and dynamic routing (connected, static, default routes)

Identify the CLI commands to configure and verify the operation of DHCP

Describe the operation and behavior of the NTP service

Identify the CLI commands to configure and verify the operation of NTP

Describe the options for securing access to a network switch (best practices for interface configuration, VLAN settings, securing spanning tree etc.)

Configure and verify local authentication

Configure and verify ACLs (Access Control Lists)

Identify the CLI commands to transfer files to/from switches

Troubleshoot common connectivity problems (link down, VLAN access, IP reachability, Blocked ports)

Outline the recommended steps during a switch OS upgrade (OS10 update)

Identify the CLI commands to enable a switch for SNMP monitoring

Explain the role and advantages of using Smart Fabric Services

Configure and verify the enablement of Smart Fabric Services

1. What accurately describes the comparison between stacking and VLT?

A.VLT allows for more physical devices to appear as one virtual device than stacking does.

B.Stacked switches share a common control plane while VLT peers maintain their own control plane.

C.Stacked switches and VLT peers allow “single pane of glass” management by maintaining a single control plane.

D.Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/ series is the same.

Answer: B

2. What accurately describes the Simple Network Time Protocol (SNTP)?

A.Time synchronization algorithms are more complex and account for clock drift.

B.Client makes sudden changes in time to keep synchronized.

C.Client synchronizes among a set of distributed time servers.

D.Implemented on a Dell EMC Network OS 9 and OS 10.

Answer: D

3. On Switch A, a static route has been redistributed into OSPF. Which type of OSPF router will this process make Switch A?

A.Autonomous System Boundary Router (ASBR)

B.Designated router (DR)

C.Area Border Router (ABR)

D.Backbone Router (BR)

Answer: A

4. What accurately describes the Network Time Protocol (NTP)?

A.Implemented on a Dell EMC Network OS 6.

B.Time synchronization algorithms do not account for clock drift.

C.Client synchronizes among a set of distributed time servers.

D.Client makes sudden changes in time to keep synchronized.

Answer: C

5. Which fields are mandatory TLVs in a LLDP PDU frame?

A.System Capabilities and Management Address

B.Chassis ID, Port ID, and Time-to-Live

C.IP Address, Default Gateway, and DNS

D.Port Description, System Name, and System Description

Answer: B

6. A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?

A.255.255.255.248

B.255.255.255.252

C.255.255.255.254

D.255.255.255.256

Answer: B